Below are the High Sierra Showerheads® models recommended for outdoor use, campgrounds, or any type of public showering installation that does not have an enclosure or use shower curtains. They feature a stainless steel set screw to discourage theft or tampering. They are ideal for use in open showering areas, gang showers, or outdoor pool and beach showers.
Applications that involve an enclosure of some kind are usually better suited to our home/hotel, dorm, or gym shower heads because the ABS splash guard they feature focuses the stream of water and prevents spray-over. If tampering or theft is an issue, we can install a stainless steel set screw in our home/hotel/dorm shower heads (a small fee to cover drilling and threading applies).
Uniform droplet spray nozzle. In addition, these models are fitted with a stainless steel set screw located in the shower head nut. After installation, the set screw is driven into the shower arm using a 1/16” allen type wrench. This feature makes it impossible for the shower head to be removed from the shower arm by hand or without special tools.
* Accuracy of flow rate is ± 10% between 30 psi and 80 psi
Shower Head Testimonial from the facilities manager of a large university:
"We have installed about 1500 of your 1.5 gpm shower heads to retrofit most of the shower stalls of our residential buildings. Our staff had tested the performance of different heads in the market and chose yours for its full flow feeling and usability such as washing the shampoo off.
"The conversion was completed before the Fall, and after two months of use we have not heard of any dissatisfaction with them.
"At the University of California at Santa Cruz we have a mandate to save a large percent of water, and this conversion from 2.5 gpm to 1.5 gpm will go a long way towards that." -- Tarun B.”
Outdoor|Public Use Spec Sheets
Spec Sheet - VRF1214 1.5gpm (353 KB)
Spec Sheet - VRF1214 1.8gpm (353 KB)
Need help? Call us at: 1 (888) 445-1941.